Lilly Lashes 3D UnderCover Lash System Kit Double Agent | MECCA

Set includes

20 faux mink lash clusters

Lash Another Day Extended Wear Lash Bond 5ml

My Lashes are Sealed Topcoat 5ml

The Bond Eliminator Adhesive Remover 2ml

Lash Applicator & Instructional Guide

Pro-tip

Tips for multi-day wear success:

– Keep your lashes completely dry for the first 24 hours.

– Don't pull or tug on your lashes, and be sure not to sleep with your face in your pillow while wearing them.

– Be sure to re-bond any loose clusters throughout the wear.

Usage

Step 1: Start with clean, dry lashes. Apply LASH ANOTHER DAY Extended Wear Lash Bond to your natural lashes as you would mascara. Using the spoolie, focus on applying the adhesive to the base of your lashes.

Step 2: Carefully remove lash cluster #1 from the tray. Apply LASH ANOTHER DAY Extended Wear Lash Bond to the band on the inside of the lash cluster using the ball tip & allow it to dry for 20-30 seconds before beginning application.

Step 3: Starting at the outer corner of your eye, use the applicator to apply lash cluster #1 to the underside of natural lashes as close to the waterline as possible, without touching it.

Using the flat end of the applicator tip, gently press the cluster into the underside of your lashes and then allow to dry for 15 seconds before applying the next cluster.

Repeat Steps 2 & 3 until the eye is complete, applying each additional cluster next to the previous one moving toward the inner corner of the eye. Depending on the size of your eye or desired look, inner corner clusters #4 and #5 may not be needed.

Step 4: Slide the curved side of the applicator tip around your lashes to bind the lash clusters to your natural lashes. Press and hold in sections for 10-20 seconds. Repeat steps 1-4 on your other eye.

Step 5: Once done applying clusters, apply MY LASHES ARE SEALED Lash Top Coat above and below your lashes. Use the ball tip to lightly dab along the base of the clusters, focusing on the inner and out corners.